QUICK ACCESS

Video Gallery
Find Product
Find Recycling Point
View All Products

...NEW!  PAY FOR VIEWS VIDEO CAMPAIGN  -  CLICK FOR DETAILS  -  GET PAID FOR YOUR VIDEO OF SCRAPERITE IN USE  -  CLICK HERE ...

TRADESMAN HOLDERS

ONE HOLDER TWO BLADES

Breaking away from all traditional standards of design and expected use, Scraperite takes the lead in the space with discontinuous innovations in product design and function built into the new Tradesman series holders. The redesigned Tradesman handles, used to hold the standard width 4cm (1 9/16 inches) plastic razor blades, now accommodate both rectangle or the new Scraperite CurveyTM blade in one holder. The slightly larger size and added design contours make the product more comfortable in the palm of the hand and pushes the blade further outboard for better reach into recessed corners of window frames. The most important addition to the series, including both Dwarf and Standard, is the pronounced thumb press blade release system. This patent pending system allows for smoother blade release by depressing the blade enough to release it from the center locking pin and slide out.

Breaking away from all traditional standards of design and expected use

Scraperite takes the lead in product design and function built into the new Tradesman series
The redesigned Tradesman handles, used to hold the standard width plastic razor blades
New Tradesman series accommodate both rectangle or curved blade in one holder
The slightly larger size makes the product more comfortable in the palm of the hand
New Tradesman series pushes the blade further outboard for better reach into recessed corners of window frames

1. EASY BLADE REPLACEMENT

Patent pending blade release system makes blade flipping and replacement a breeze.

2. CORNER REACH

Trimmed holder angle effectively provides more blade reach into corners.

3. DUAL BLADE SYSTEM

Cleverly accommodates both curved and rectangle blades.

4. STRENGHTENED

The prestressed curve and thick extra ribbing provide increased leverage and torque at the blade edge.

5. ERGONOMIC

Sloped palm section makes a smooth connection with the back of the hand.

6. EXTRA REACH

Longer handle for increased, reach, performance, and power.
Scraperite holders have easy blade replacement
Scraperite Tradesman series effectively provides more blade reach into corners
Scraperite Tradesman series cleverly accommodates both curved and rectangle blades
New Scraperite Tradesman series provide increased leverage and torque at the blade edge
Sloped palm section makes a smooth connection with the back of the hand


Longer handle for increased, reach, performance, and power

BLADE RELEASE SYSTEM

PATENTS PENDING AND ISSUED

Scraperite products do not damage or scratch

1. READY TO GO

All holders are packaged with blade inserted and ready for immediate use.

2. FLIP OR REPLACE

Edge sharpness breaks down under various conditions including heat generated by friction, surface smoothness, substance being removed and impurities that may get imbedded in the blade edge. Blade replacement is made simple by a patent pending blade release system used to depress the blade enough to free it from the central locking mechanism.

3. BLADE LOCK

Simple direct slide action click to lock system for a solid secure fit.

 

DEPRESS TAB

New Scraperite Tradesman series depress tab

RELEASE BLADE

New Scraperite Tradesman series blade release system

PULL TO REMOVE

Pull to remove the plastic razor blade from the new Scraperite Tradesman series


Scraperite Tradesman series correct handling

CORRECT HANDLING

Scraperite logo and lettering should face upward when using the scraper handle
Scraperite blade lettering should face upward when inserting the plastic razor blade
Scraperite logo and lettering should face upward when using the scraper handle. The blade lettering should also face upward when inserting the blade, for best use. The best angle of attack being somewhere around 25º-30º degrees of attitude to the surface being scraped.

The Scraperite Tradesman series blade release system uses the flexibility of both blade and holder design. Depressing a center tab on the top of the holder, the plastic razor blade bends just enough to free it from the center locking pin and push it forward. A light touch and outward pulling motion across the bottom of the blade with the opposite hand frees the bade easily. Simply flip the double edged blade to the second usable side or grab a new one.

The development team's inspiration for creating a better release system came from watching parents and grandparents struggle with the original design, as dexterity becomes reduced The same basic system applies to the entire range of Tradesman Holders.
Blades should be inserted so the SCRAPERITE logo on both the blade and holder face upwards

Scraperite Dwarf holders with two blades

One holder fits both blades

The Scraperite Tradesman Dwarf and Standard

New Combo Pack - BUY NOW

Scraperite Tradesman Dwarf 63 - SRTD series

TRADESMAN DWARF 63 - SRTD SERIES

Tradesman 40 Dwarf - SRTD Series

The new Tradesman Dwarf 63 plastic blade holder replaces the original Li'l Gripper. These holders fit the standard rectangle plastic blades. The Dwarf holder incorporates some of the latest design improvements including

  • New blade release system for easy blade replacement
  • New larger ergonomic stylized design for added handling comfort
  • New materials for easier recycling
  • Dual Blade System fits new CurveyTM curved blade
  • More pronounced blade position for better corner reach

Recycling Code 5 Polypropylene  Recycling Code 5 Polypropylene - bring these back for commercial recycling or check if your local recycling program accepts polypropylene. They'll get ground up, melted, and made into something else. Program available through our Official Reseller Network, return the used product to the seller and we'll do the rest.

Scraperite SRTDSGPO plastic safety scrapers

Tradesman Dwarf
Launched 2020

Scraperite SRLGYGPO safety scrapers

Li'l Gripper
2006-2019

See details

Scraperite Tradesman standard 168 - SRT series

TRADESMAN STANDARD 168 - SRT SERIES

The new Tradesman 40 Standard plastic blade holder replaces the original Big Gripper

The new Tradesman Standard 168 plastic blade holder replaces the original Big Gripper. These holders fit the standard rectangle plastic blades. The new Tradesman Standard holder incorporates some of the latest design improvements including

  • New blade release system for easy blade replacement>
  • New ergonomic longer handle adds comfort at the back of the palm and overall slightly larger size makes it more comfortable in repeated use professional use settings.
  • New materials for easier recycling and added strength
  • Dual Blade System fits new CurveyTM curved blade
  • More pronounced blade position for better corner reach

Polypropylene commercial recycling  Recycling Code 5 Polypropylene - bring these back for commercial recycling or check if your local recycling program accepts polypropylene. They'll get ground up, melted, and made into something else. Program available through our Official Reseller Network, return the used product to the seller and we'll do the rest.

Scraperite SRTCGPO Extracted safety scrapers

Tradesman Standard

shown with CurveyTM Blade
Launched 2020

Scraperite SRTSGPO Extracted plastic safety scrapers

Tradesman Standard

shown with Rectangle blade
Launched 2020

Scraperite Big Gripper GPO

Big Gripper

shown with Rectangle blade
2008-2019

See details

Scraperite Tradesman Wide W4 - SRTW series

TRADESMAN WIDE W4 - SRTW SERIES

Scraperite Tradesman Wide with bullet points
Scraperite Tradesman Wide W4 SRTWGPO Extracted
See details

Scraperite Tradesman Wide W4 plastic razor blades

See our patent pending Blade Release system page

See Blade Characteristics page

Find an Official Reseller portal and find a Dealer near you